Need help?Do you have a question about the Megger MIT417/2 and is the answer not in the manual?
General| Brand | Megger |
|---|---|
| Model | MIT417/2 |
| Category | Measuring Instruments |
| Language | English |
Crucial safety precautions and practices for instrument operation.
Important safety notes on voltage detection and hazardous voltage handling.
How to connect test leads for 2-terminal measurements.
Information on connecting test leads for 3-terminal measurements.
Procedures for AC Trms and DC voltage measurements using 2 terminals.
Step-by-step guide for performing AC Trms voltage measurements.
Steps to perform DC voltage measurements on the instrument.
Performing voltage measurements using 2 test leads on 3-terminal instruments.
Critical safety precautions for insulation resistance testing.
Procedures for insulation testing using 2-terminal connections.
Step-by-step guide to performing insulation resistance tests.
How to perform continuity tests with 2-terminal instruments.
Step-by-step guide for continuity testing.
How to navigate and change settings within the SETUP menu.
Table listing setup options, functions, options, and factory settings.
Detailed specifications for insulation testing, including test voltage and accuracy.
Detailed specifications for continuity testing, including accuracy and test current.
Detailed specifications for voltage measurements, including range and accuracy.
How to check battery status and replace batteries.
Step-by-step instructions for replacing the instrument's batteries.
Information on instrument repair, warranty terms, and conditions.
To Next Page
