What to do if Megger MOM690 Measuring Instruments display shows O.L.?
If your Megger Measuring Instruments display shows 'O.L.', it indicates that the measuring range has been exceeded or there's poor contact at the measurement cables. If possible, select a different current range. Also, check the connections to ensure they are properly connected.
What to do if the miniature circuit breaker trips on Megger MOM690?
If the miniature circuit breaker trips on your Megger Measuring Instruments, it may be due to an overload or a faulty instrument. Reset the miniature circuit breaker. However, if it trips again, contact service personnel.
Why does the thermal miniature circuit breaker trip on Megger MOM690 Measuring Instruments?
The thermal miniature circuit breaker on your Megger Measuring Instruments may trip due to an overload. Wait for the instrument to cool down.
General| Brand | Megger |
|---|---|
| Model | MOM690 |
| Category | Measuring Instruments |
| Language | English |
Explains symbols used on the instrument for user guidance and safety.
Provides critical instructions for safe operation and potential hazards.
Details and identifies all controls and connection points on the instrument panel.
Explains the information presented on the instrument's display screen during operation.
Describes user-configurable settings accessible through the instrument's menu system.
Details the step-by-step process for connecting the instrument before operation.
Covers procedures for using the instrument, including safety functions and measurement modes.
Provides practical examples of using the MOM690 for specific resistance measurements.
Describes the available PC software for analysis and control of the instrument.
Lists common faults, their causes, and recommended remedies for the instrument.
Lists detailed technical specifications for the MOM690 instrument.
Details specifications for various cable sets and their corresponding load current capabilities.
To Next Page
