Security Protection, Symbol means that the user must pay extra attention to
prevent risk during operation and increase the awareness of personal
protection.
Requirements of Staff
Staff attached to the machine can be distinguished according to position and
training degrees as follows:
Operator
A person who does not have to be with professional technical background, just
trained for ordinary operation of the machine, such as filling, extracting, cleaning,
basic maintenance, could identify warning information and do easy handling.
Any operator should be aware of that, when using industrial equipment or
devices, rotary motor, driving system, high voltage components as well as high
temperature parts may cause serious damages to persons.
Skilled Technician
A person with professional knowledge and skills capable of operation, installation,
maintenance and repairs, etc.
CAUTION
One must be aware that the staff does not carry out any operation out of its own
sphere of knowledge and responsibility.
NOTE
According to the current standard, a technician should have the following
characteristics:
well-trained with experience and knowhow.
familiar with principle and prescriptions, capable to take accident
prevention.
knowledge of machine operating conditions, is able to realize and avoid
any danger and carry out all kinds of interventions permitted by the person
in charge of plant safety.
NOTE
Before carrying out any kind of maintenance, make sure that the machine is not
under working. It is prohibited to remove the covers of the machine or reach
inside of the machine without disconnecting the machine from the power.
MEHEN is not responsible for any accident happened to machines or any
operators caused due to non-compliance to the principle and regulations in
operating, washing and maintenance.
To Next Page
Loading...