CHAPTER 1. RECEIVING, MOVING, UNPACKING
1.1 Precautions On Receiving
Before unpacking the machine, check the package to observe if any external
damages caused by hitting or capsizing during transportation.
An external damage could mean the machine itself might have been damaged
already. In this case, the clients must:
Immediately make a claim to insurance company and leave everything as it
is on reception.
Reject to accept the machine.
Don't open the external package to leave everything as it is.
Immediately inform the seller and insurance company and make a claim.
1.1.1 Moving Notice for Packed Machine
To move the package, insert lift forks into the space between pallet feet, so as to
balance the machine weight and steadily lift the machine.
1.2 Unpacking
Bottom part of the machine will be fixed on a wooden base, while the
four sides will be nailed by four pieces of wooden board.
Wear gloves and use proper tools when opening the wooden package
so as to prevent any scratch by debris of wood or nails.
Prize up the top of the package, open the four side-boards and only
leave the base as it is.
Take off the plastic cover of the machine.
Check up if any damages during the transportation.
Balance the machine in proper position, open the machine side-panels
and loose the bottom screw.
Move machine from the wooden base.
Make sure safety during all operations mentioned as above. Improper
operation may cause injury of people crashed or cut by machine, even
the machine may capsize when it looses balance.
NOTE
Inside of the machine you will find an instructions handbook, please read it
carefully before any operation of the machine.
To Next Page
Loading...