Operating instructions EcoStar 545 D-M
Datei:1_EcoStar545D-M_9662798_Betriebsanleitung_EN_2009-05.doc Update:2009-12-18 MRL 9662798
2/42
We reserve the right to change execution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Contents
Page
1 Introduction and general information 3
1.1 Storage 4
1.2 Name and address of manufacturer 4
1.3 Description of the type of equipment 4
2 Explanation of the safety symbols used 5
3 Use of the appliance for the purpose intended 5
4 CE-Declaration of Conformity 6
5 General safety information 7
5.1 Operator's duty of care 7
5.2 Basic safety measures 8
6 Delivery, shipping, installation and assembly 10
6.1 Delivery 10
6.2 Transport, installation and assembly 10
6.3 Operating conditions 11
6.4 Requirements for the electrical connection 11
6.5 Requirements for the fresh water connection 12
6.6 Requirements for the waste water connection 12
6.7 Emergency-off 12
6.8 Chemicals for the operation of the appliance 12
6.9 Instructions for the disposal of the packaging material 13
7 Settings for initial commissioning by the service engineer 13
7.1 Commissioning 13
8 Washing with dish-washer 13
8.1 Operating panel 13
8.2 Preparation for washing and rinsing 14
8.3 Manual dosing of detergent 14
8.4 Automatic dosing 14
8.5 Operation during washing and rinsing cycle 15
9 Shutting down the dishwasher 16
10 Care and maintenance 16
10.1 Care, general 16
10.2 Refilling of detergent 16
10.3 Refilling with rinse aid 17
10.4 Cleaning 17
10.5 Maintenance of stainless steel surfaces 17
10.6 De-scaling 18
11 Machine with built-in water softening device EW10 18
11.1 General 18
11.2 Adjustment of water hardness 18
11.3 Capacity of the built-in water softening device 18
11.4 Regeneration 18
12 Basic information on the appliance 19
12.1 General description of the washing machine 19
12.2 Noise level 21
12.3 Data reg. the electrical and hydraulic equipment 21
12.4 Dimensions, technical data, installation instructions 21
13 Tips for self-help in the case of faults 22
14 Staff training 23
15 Authorized user of this documentation 23
16 Settings / modifications / on-site adaptation 24
16.1 Using the keyboard for programming 24
16.2 Code entry 24
16.3 Service level 25
16.4 Parameter list 30
16.5 Assignment list View inputs / control outputs 33
16.6 Rinse program parameter update: 01.05.2009 33
17 Operating errors 34
17.1 Information reporting and troubleshooting 34
17.2 Error messages and troubleshooting 36
18 Maintenance 38
18.1 Basic safety measures during normal operation 38
18.2 Dosing units 38
18.3 Maintenance plan 39
19 Environmentally acceptable measures, Disposal of the installation 40
20 Documentation 40
To Next Page
Loading...
