9 Change service level/settings
CAUTION – Malfunction due to incorrect parameter
Before changing parameter settings:
• Contact an authorised in-house technician or MEIKO Service.
• Note service instructions.
The service level permits the following settings and functions in the display:
• Display or change the list of service parameters.
• Ventilate the rinse pipe.
• Ventilate the detergent pipe.
• Set date and time.
• Open door or unlock door.
• Define the first text line in the error indicator (e.g. service number or number
of in-house technician)
9.1 Call service levelCall service level
1. Make sure that the washer-disinfector is ready for operation and that all
cleaning programmes have been completed.
2. Press arrow for 2 seconds.
3. Enter access code.
4. 10000 = Display level 1.
5. 10001 = Display and change level 1.
6. Press the error acknowledgement key .
Display shows service level.
Note
When the service level is shown in the display, all other functions of the
washer-disinfector are blocked.
If no key is pressed for 120 seconds, the washer-disinfector automati-
cally exits the service level and switches to the Ready for operation
status.
If a setting is being edited, the selected value flashes.
In the service level, the keys on the washer-disinfector have the following func-
tions:
To Next Page
