● Installing the bike mount on the stem or handlebar
Mount up & Lock it Down
1. Place the bike mount on the stem or handlebar of your bicycle with the
rubber side down. (The triangle symbol in front must point in the direction
of travel.)
2. Attach the bike mount securely using the two rubber bands. (Lock the
mount firmly with two suitable rubber bands according to the size of the
stem and handlebar.)
3. Place the bike computer in the mounting grooves and turn clockwise until
it locks in place. To remove, turn counterclockwise or clockwise and lift.
* NOTE: Two rubber bands fix the mount diagonally.
1 2
3 4
12
To Next Page
Loading...
