GPS and Backlight
• GPS signal
* Please make sure your M3 is used at open space and barrier-free area
1. Turn on M3.
2. GPS positioning:
A. It’s searching for GPS when LED indicator light is slow blinking.
C. After GPS positioning is successful, the time is automatically
synchronized with the local time via GPS.
D. After the GPS positioning is successful and the M3 works for a few
minutes, the altitude will be automatically calculated by GPS.
* GPS positioning may take 2 minutes or even a longer time when it is
turned on for the first time or after a long period of non-use.
B. When the LED indicator light stays on with full brightness and it reminds
the"Beep"sound at the same time, the GPS positioning succeeds.
You can start to ride.
After 30seconds,the LED light will turn off; it will blink one time per
minute later to remind the power status for user.
3
To Next Page
Loading...
