meitav-tec MTSC - Page 34

4. Technician settings (cont’)
-35 -
P116 – Cool PID Ki (FC only!)
Range: 0...100%
Default: 0%
P117 – Heat PID Ki (FC only!)
Range: 0...100%
Default: 0%
P118 – Cool PID Kd (FC only!)
Range: 0...100%
Default: 1%
P119 – Heat PID Kd (FC only!)
Range: 0...100%
Default: 1%
P198 – Protocol indication (read only!)
0 - MODBUS
1 - BACnet