Front Panel & Functions
4. • USB : Selects USB digital audio (USB B Type connector)
• NET : Selects Network/Streaming digital audio (RJ45 connector)
5. The screen saver function engages after 2 minutes of inactivity. It dims the screen for
3 seconds before turning the screen off. Engaging the remote, touch buttons or
volume, returns screen brightness to previous state. Function is disabled when display
brightness is set to off.
6. Enable/disable the screen saver by pressing and holding the brightness touch button
until you see the screen saver function page. Except when NET(network) is selected.
7. Pressing and holding the input touch button, displays the firmware version on the left
display along with copyright notice.
Please note:
1. The Meitner Audio MA3 is a Class 2.0 USB Audio device. Class 2 audio devices
are supported natively in Windows 10 UAC2 and higher, OSX 10.5.7 and higher, and
on Linux with ALSA 1.0.23 and higher.
2. For Windows 7 and higher, Class 2 USB Audio device drivers are included with the
MA3 or you can download it from our website. Page 14 has installation instructions.
3. Please use USB 2.0 compliant devices for maximum high resolution audio
compatibility. Using the MA3 with a USB 1.0 and 1.1 device/interface will limit
digital audio bandwidth to 44.1/48kHz sample frequencies.
4. For proper high definition audio transfer (176.4,192kHz sample rates or DSD) using
the AES, TOSLINK or SPDIF interfaces please ensure that you use high quality cables
and your digital source device supports those sample frequencies using those inputs.
010
Front Panel & Functions MA3 Integrated D/A Converter Manual
meitner © 2020 Meitner Audio, All Rights Reserved. Meitner Audio reserves the right to amend specifications & design without notice.
Firmware and Copyright
Screen Saver Enable/Disable
EXIT
CHANGE
1.08
To Next Page
Loading...
Need help?
General