Melitta Barista Smart User Manual

Preparing beverages
49
GB
5.3 Preparing milk froth and
warm milk
The preparation of milk froth and warm
milk is similar.
Requirement: Milk is connected.
1. Place a vessel beneath the outlet.
2. Press the "Milk froth/milk" button.
a) Milk froth = briey press button
b) Warm milk = press the button for
longer (2 seconds)
» Milk dispensing begins.
» The display shows: Easy Cleaning?
(OK for start).
3. Remove the vessel.
4. Run the Easy Cleaning programme or
prepare another beverage and then
carry it out, see section9.4, page57.
5.4 Preparing hot water
1. Place a vessel beneath the outlet.
2. Press the "Hot water" button.
» Hot water dispensing begins.
3. Remove the vessel.
5.5 Preparing beverages with
recipes (BARISTA
TS model
only)
Information
When selecting a recipe with milk, connect
the milk container or a commercially avail-
able milk pack.
The direct starting of recipes is similar for
all beverages. The selection of a lungo is
described as an example here.
Requirement: The appliance is ready
for operation.
1. Place a vessel beneath the outlet.
2. Press the "My Coee/Recipes" button
until the Recipes prole appears and
conrm with "menu/ok".
» The recipe selection appears on the
display.
Alternatively, you can also press the
"My Coee/Recipes" button for 2
seconds to access the recipe selection
directly.
3. Use the arrow buttons to select Lungo
and conrm with "menu/ok".
4. Remove the vessel.
5.6 Changing beverage set-
tings before and during
preparation
Beverage settings can be changed before
and during beverage preparation.
Information
These settings only apply to current bever-
age preparation.
Changing beverage settings before
preparation
The bean type, the total beverage quan-
tity, the coee strength and the coee
avour can be changed before selecting a
beverage.
Information
The coee avour is set with the Intense
aroma function. STANDARD and INTENSE
are available for selection. In the INTENSE
setting, the brewing time is longer and the
coee has a more intense aroma.
 Select a bean type with the
"BEANSelect" button (BARISTATS
model) or with the "BeanSelect" slider
(BARISTAT model).
14:38
STANDARD
INTENSE
 Before selecting a beverage, use the
"Beverage quantity" slider to set a bev-
erage quantity.

Melitta Barista Smart Specifications

General

Coffee Bean Capacity	270g
Water Tank Capacity	1.8L
Milk Frother	Yes
Grinder	Yes
Display	Yes
Bluetooth Connectivity	Yes
Power	1450W
Pump Pressure	15 bar
App Connectivity	Yes
Number of Coffee Specialties	21
Adjustable Coffee Strength	Yes
Adjustable Coffee Quantity	Yes
Programmable	Yes
Automatic Cleaning	Yes
Automatic Rinsing	Yes
Type	Automatic Coffee Machine
Milk System	Integrated Milk System