Melitta Barista Smart User Manual

Care and maintenance
60
GB
With consistent use of a Melitta water
lter, carry out the descaling program at
least once a year.
The descaling programme takes approx-
imately 25 minutes and should not be
interrupted.
CAUTION
Contact with descaling agent may lead
to eye and skin irritation.
 Observe the processing instructions on
the packaging of the descaling agent.
ATTENTION
Use of unsuitable descaling agent may
damage the appliance.
 Only use Melitta® ANTI CALC liquid
descaling agent for fully automatic
coee makers.
 Observe the processing instructions on
the packaging of the descaling agent.
ATTENTION
A water lter may be damaged if it is
screwed in during the descaling pro-
gramme.
 Remove the water lter when the appli-
ance requests you to do so (see
Fig. 25,
page61).
 Place the water lter into a vessel lled
with tap water during the descaling
programme.
 The water lter can be reinserted and
reused when the descaling programme
is complete.
Requirement: The appliance is ready for
operation.
1. Press the "menu/ok" button for 2sec-
onds.
» The menu appears on the display.
2. Navigate to the Care > Descaling menu.
3. Use the arrow buttons to select Start
and conrm with "menu/ok".
4. Follow the further instructions on the
display up to the end of the descaling
programme.
» The appliance is ready for operation.
9.8 Setting the water hardness
The set water hardness inuences the fre-
quency of descaling. The harder the water,
the more frequently the appliance has to
be descaled.
Information
The water hardness cannot be set if
you use a water lter (see section9.9,
page60).
Determine the water hardness with the
enclosed test strip. Observe the instruc-
tions on the test strip packaging and in the
table Water hardness range, page62.
Requirement: The appliance is ready for
operation.
1. Press the "menu/ok" button for 2sec-
onds.
» The menu appears on the display.
2. Navigate to the Settings > Water hard-
ness menu.
3. Use the arrow buttons to select the
water hardness range and conrm with
"menu/ok".
4. Exit the menu with the Exit command.
» The appliance is ready for operation.
9.9 Using a water lter
The use of a water lter extends the ser-
vice life of the appliance and the appliance
has to be descaled less frequently. The
water lter contained in the scope of deliv-
ery lters calcium and other pollutants out
of the water.

Melitta Barista Smart Specifications

General

Coffee Bean Capacity	270g
Water Tank Capacity	1.8L
Milk Frother	Yes
Grinder	Yes
Display	Yes
Bluetooth Connectivity	Yes
Power	1450W
Pump Pressure	15 bar
App Connectivity	Yes
Number of Coffee Specialties	21
Adjustable Coffee Strength	Yes
Adjustable Coffee Quantity	Yes
Programmable	Yes
Automatic Cleaning	Yes
Automatic Rinsing	Yes
Type	Automatic Coffee Machine
Milk System	Integrated Milk System