Melitta Caffeo Varianza CSP - Installing the appliance; Connecting the appliance; Switching on the appliance for the first time

First steps
13
ENGLISH
9
Fig. 5: ON/OFF button
Requirement: The appliance has been installed and connected.
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button.
» The welcome display appears on the appliance.
» The request to carry out the setup appears: Please set up the machine.
3. Conrm with "menu/ok".
» The Language menu appears.
4. Select your language with the arrow buttons. Conrm with "menu/ok".
» The Water hardness menu appears.
5. Select the determined water hardness range with the arrow buttons or
conrm the default value with "menu/ok".
» The request Please rell and insert water tank appears.
6. Remove the water tank. Rinse the water tank out with clean water. Fill
the water tank with fresh water and insert it.
» The appliance heats up and performs automatic rinsing.
» The ready symbol appears on the display.
7. Fill coee beans into the bean container. To do this, read section4.4
Filling coee beans into the bean container on page17.
» As required, a water lter can now be inserted (see section 9.9 Using a
water lter on page42).