Melitta Caffeo Varianza CSP - Page 23

Using the My Bean Select® function
24
ENGLISH
MY BEAN SELECT
Fill in single portion
Mount spoon
Fig. 15: Filling with coee beans for the My Bean Select® function
1. Remove the measuring spoon(2) from the bean chute(36).
» The My Bean Select message appears on the display with the requests
Fill with single portion of beans, put back the spoon.
2. Use the measuring spoon to ll a single portion of coee beans into the
bean chute(36).
3. Place the measuring spoon back onto the bean chute.
» The My Bean Select ready symbol with the Select beverage request
appear on the display.
4. Prepare any coee beverage.
Information
The measuring spoon is intended to help in lling the correct amount of
coee beans into the bean chute.
 A full measuring spoon contains approx. 10 to 11 g of coee beans.
Depending on the desired coee strength, fewer coee beans can also
be lled.
 If there are less than approx. 8g coee beans in the bean chute, the My
Bean Select® function is not activated. The My Bean Select ready symbol
does not appear on the display. The next time a coee is dispensed, the
coee beans from the bean chute are mixed with the coee beans from
the bean container.