Melitta Cafina XT4 - General Submenu

10-18 Melitta Cana XT4 Touch Display Service Manual V1.0 -270320
General submenu
General parameters relating to the product are set in this menu, e.g., the Product picture and
the Product name, which are then displayed on the button on the start screen. In a recipe's
basic conguration, the group symbol [1] appears as the product picture.
Click on the border around the product picture [2] to open the Product picture window [3]. You
can select a product picture from the saved product pictures here. In this example, a cup symbol
has been selected. Transfer the selected product picture and close the window by clicking on
Save [4]. If you click on Reset [5] instead, the currently displayed product picture is removed
and the most recently used product picture is displayed once again.
Click on the product name [6] to open the Select / enter product name window [7]. In this window
you can select the required product name [8] and/or an additional text [9] from a suggestion list
[10] or enter it directly using a keyboard. Click on an entry in the suggestion list to transfer the
selected term into line 1 or line 2 of the Product name eld [11], depending on which line was
selected previously. The keyboard [12] opens if you click on the keyboard symbol [13]. To apply
the settings, click OK [14] in the keyboard eld and on the Save button [15] on the product
names screen.
  Product parameters                                                          
Twin function
-
Multiplicator
0
Dispensing stop
No
Product name
Café Crème
Product picture
2
1
Product picture
Reset Save
3
5
4
6
Reset OK
Espresso
Select / enter product name
12
14
Select / enter product name
Product name Suggestions
Reset Save
2 Espresso
Espresso
Café Crème
Cocoa
Instant 2
Instant 2
Product names
Additional texts
7
8
9
10
11
13
15