Melitta Cana XT4 Touch Display Service Manual V1.0 -270320 10-7
Service menu side menu
The Service menu contains two levels for operating and programming the coee machine. Access
to these levels is password-protected. To access the Manager menu or Service menu, check
the relevant box, then enter the corresponding password using the number eld.
The default password for the Manager menu is "1111".
The default password for the Service menu is "5049".
After entering the password, conrm it by pressing the Enter button [1]. The rst screen of the
Manager or Service menu will then appear. The main menu items are shown as tabs and look
the same for both the Manager and Service menu levels. Some submenus and menu items are
only visible on the Service level. This manual presents all the submenus and menu items,
including those which are not visible in Manager mode, so as to provide a comprehensive
description of every menu item. These menus and menu items (available in Service only) are
marked in red to make things clearer.
Please enter the password
Manager Service
cancel
1
Tip: You can change the passwords in the „Parameter Betrieb“ auf Seite 10-25 menu. If you do not know the
password, you can access the Service menu without a password by connecting a jumper plug. Then you can
reset the password as you wish.
INFO