Mellanox Technologies ConnectX-4 Lx Firmware Release Notes

FlexBoot Changes and New FeaturesRev 14.14.2036
Mellanox Technologies
28
- Description: Boot retries is currently not functional when booting from iSCSI.
WA: N/A
Keywords: iSCSI
655800 Description: IPv6 is not supported.
WA: N/A
Keywords: iSCSI
- Description: Boot menu is displayed as READ ONLY if the HCA card does not support
flash configuration.
WA: N/A
Keywords: User Interface
- Description: FlexBoot Boot Menu will not be visible in serial output.
WA: N/A
Keywords: User Interface
- Description: FlexBoot Boot Menu will not be shown in ConnectX-4 if the physical port
is IB.
WA: N/A
Keywords: User Interface
- Description: FlexBoot Boot Menu will not be shown in ConnectX-4 and ConnectX-4 Lx
if the physical port is IB
WA: N/A
Keywords: User Interface
- Description: Large Receive Offload (LRO) and iSCSI may not interoperate due to a bug
in current Linux kernel distributions.
WA: Disable LRO in the IPoIB module when using iSCSI.
See the Mellanox FlexBoot user's manual for details under the Diskless Machines chap-
ter (InfiniBand Ports).
Keywords: Networking
- Description: Flexboot supports only 2K MTU.
WA: N/A
Keywords: Networking
Table 16 - FlexBoot Known Issues
Internal Ref. Issue

Mellanox Technologies ConnectX-4 Lx Specifications

General

Brand	Mellanox Technologies
Model	ConnectX-4 Lx
Category	Adapter
Language	English