Mellanox Technologies MIS5022Q-1BFR - Dismantling Instructions; Infiniband Switch Systems - General; General Preparations

Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
6 of 13
1 Dismantling Instructions
This guide provides detailed instructions for dismantling the Mellanox InfiniBand
switch systems. Follow the instructions in the order they are presented.
1.1 InfiniBand Switch Systems - General
The InfiniBand switch system complies with the RoHS directive under the
exemption known as RoHS-6.
The last digit of the product part number represents the RoHS type.
For example
MIS5022Q-1BRR — the last R = RoHS-6
InfiniBand switch system systems are comprised of:
 Cover
 Power Supply Unit (PSU)
 Harnesses
 Fan unit
 Main Board
1.2 General Preparations
The InfiniBand switch system is assembled using Philips screws, and handles
with snap in latches for modules.
To disassemble the InfiniBand switch system you will need a small Philips
screwdriver.
The pictures displayed in the following pages provide visual guidance explaining
how to remove the modules from the mechanical base.