Melnor 63015 - User Manual

To Next Page

63015

Automatic Water Timer

User Instructions

English

63015_INS_ENG_01

START WATER HOW LONG

OFF

HOW OFTEN AUTO

SET CLOCK

RAIN DELAY, HOLD

DELAY

FOR

EVERY

RESET

MANUAL

NEXT START TIME

MIN

HRS

DAY

Cursor Button

+/- Buttons

Manual Watering Button

Battery Indicator

START WATER HOW LONG

OFF

HOW OFTEN AUTO

SET CLOCK

RAIN DELAY, HOLD

DELAY

FOR

EVERY

RESET

MANUAL

NEXT START TIME

MIN

HRS

DAY

Battery Installation & Assembly

■ Remove the battery holder from the back of the Timer

Control Unit. Insert two AA alkaline batteries (Do not

use rechargeable batteries) as indicated on the battery

holder. Replace the battery holder, making sure that it

is rmly and securely placed in the Timer Control Unit.

■ NOTE: Do not use your timer when the air temperature

is below 40°F (4.5° C). When storing your timer, be

sure it is in a dry place and protected from frost.

Installation of the Timer

■ Attach the timer to an outside faucet and turn on the water. The water must

be left on while the timer is attached to the faucet for your timer to operate.

■ NOTE: You may choose to program your timer before or after attaching it

to the faucet.

SETTING THE CLOCK

■ Touch any button to wake the timer.

■ Using the button, move the arrow to SET CLOCK.

■ Press the & buttons to adjust the clock to the current time.

■ Press the

button again to set the time and move to the next setting,

START WATER.

SELECT WHEN TO WATER

■ With the arrow pointing to START WATER, use the & buttons to

select the rst time of the day you want to water. All remaining watering

cycles during the day will be based on this time.

■ Press the

button to move to the next setting.

SELECT HOW LONG TO WATER

■ With the arrow pointing to HOW LONG, use the & buttons to select

the length of each watering cycle.

■ Cycles can be up to 360 minutes (6 hours) in duration.

■ Press the

button to move to the next setting.

SELECT HOW OFTEN TO WATER

■ With the arrow pointing to HOW OFTEN, use

the & buttons to select the watering

frequency.

■ Watering can be as often as Every 1 Hours or

little as Every 7 Days (once per week)

■ Press the

button to complete programming.

■ The timer will enter AUTO mode and the program

will be active. Watering will begin with the next

available watering time.

AUTO MODE

■ After programming, the timer will be in AUTO mode.

■ The screen display will toggle between the current TIME and the NEXT

START TIME. This will allow you to see at a glance what will happen next.

■ If the next watering cycle is more than 24 hours away, the NEXT START

TIME will be displayed in days instead showing a time.

We recommend replacing batteries when the indicator reaches

START WATER HOW LONG

OFF

HOW OFTEN AUTO

SET CLOCK

RAIN DELAY, HOLD

DELAY

FOR

EVERY

RESET

MANUAL

NEXTSTART TIME

MIN

HRS

DAY

START WATER HOW LONG

OFF

HOW OFTEN AUTO

SET CLOCK

RAIN DELAY, HOLD

DELAY

FOR

EVERY

RESET

MANUAL

NEXTSTART TIME

MIN

HRS

DAY

START WATER HOW LONG

OFF

HOW OFTEN AUTO

SET CLOCK

RAIN DELAY, HOLD

DELAY

FOR

EVERY

RESET

MANUAL

NEXTSTART TIME

MIN

HRS

DAY

START WATER HOW LONG

OFF

HOW OFTEN AUTO

SET CLOCK

RAIN DELAY, HOLD

DELAY

FOR

EVERY

RESET

MANUAL

NEXTSTART TIME

MIN

HRS

DAY

START WATER HOW LONG

OFF

HOW OFTEN AUTO

SET CLOCK

RAIN DELAY, HOLD

DELAY

FOR

EVERY

RESET

MANUAL

NEXTSTART TIME

MIN

HRS

DAY

START WATER HOW LONG

OFF

HOW OFTEN AUTO

SET CLOCK

RAIN DELAY, HOLD

DELAY

FOR

EVERY

RESET

MANUAL

NEXTSTART TIME

MIN

HRS

DAY

START WATER HOW LONG

OFF

HOW OFTEN AUTO

SET CLOCK

RAIN DELAY, HOLD

DELAY

FOR

EVERY

RESET

MANUAL

NEXT START TIME

MIN

HRS

DAY

SUNDAY MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY

EVERY 2 DAY

EVERY 1 DAY

EVERY

WEEK

ONE

WEEK

TWO

WEEK

ONE

WEEK

TWO

EVERY 3 DAY

Need help?

Do you have a question about the Melnor 63015 and is the answer not in the manual?

Summary

Melnor AquaTimer Automatic Water Timer

Model 63015 Introduction

An overview of the Melnor AquaTimer automatic water timer, model 63015.

Installation and Initial Setup

Battery Installation and Handling

Instructions for inserting AA batteries and notes on temperature and storage.

Attaching Timer to Faucet

Steps for connecting the water timer to an outdoor faucet.

Setting Up Your Watering Schedule

Setting the Current Time

Procedure to set the correct time on the timer's display.

Defining Start Watering Time

Selecting the desired start time for the initial watering cycle.

Setting Watering Duration

Specifying the length of each watering cycle, up to 360 minutes.

Choosing Watering Frequency

Selecting how often the timer will water, from daily to weekly intervals.

Operating the Water Timer

Understanding Auto Mode

How the timer operates automatically and displays the next start time.

Using Rain Delay Mode

Temporarily stopping watering for up to 7 days due to rain conditions.

Using Off Mode

Disabling automatic watering for extended periods.

Manual Watering Function

Instructions for manually starting and stopping watering cycles on demand.

Advanced Features and Maintenance

Timer Reset Procedure

Procedure to erase all programming and restore factory default settings.

Maintenance and Battery Tips

Guidance on cleaning, seasonal storage, and battery life optimization.

The Melnor AquaTimer 63015 is an automatic water timer designed to automate watering schedules for gardens, lawns, and other outdoor areas. It attaches to an outside faucet and controls the flow of water to a hose or other watering tool, allowing users to set specific times, durations, and frequencies for watering.

Function Description:

The timer operates by allowing users to program a watering schedule through its intuitive interface. Key functions include:

Setting the Clock: Users can set the current time, which serves as the basis for all programmed watering cycles.
Selecting When to Water (Start Water): This feature allows users to specify the first watering start time of the day. Subsequent watering cycles will be based on this initial time.
Selecting How Long to Water (How Long): Users can set the duration of each watering cycle, with a maximum duration of 360 minutes (6 hours).
Selecting How Often to Water (How Often): The timer offers flexible frequency options, ranging from every 1 hour to every 7 days (once per week).
AUTO Mode: Once programmed, the timer enters AUTO mode, where it automatically executes the set watering schedule. The display toggles between the current time and the next scheduled start time, providing a quick overview of upcoming watering events. If the next watering cycle is more than 24 hours away, the display will show the number of days until the next start time.
RAIN DELAY Mode: This feature allows users to temporarily pause the watering schedule for up to 7 days in anticipation of rain or during periods of sufficient moisture. After the delay period, the program automatically resumes. The display shows the remaining delay time, indicating days if the delay is greater than 12 hours.
OFF Mode: For extended periods when watering is not desired, users can set the timer to OFF mode. In this mode, the timer will not water automatically, and the display will show "OFF." To resume automatic watering, the timer must be switched back to AUTO mode.
MANUAL Watering: The timer includes a manual override function, allowing users to initiate watering immediately for a specified duration, independent of the programmed schedule. This is useful for tasks like hand-watering specific plants or using a hose for other purposes. The valve will open for the selected time and then automatically close. The timer remembers the last manual time set.
TIMER RESET: A reset function is available to erase all programmed settings and restore the timer to its original factory state. This is achieved by pressing and holding a specific button for 7 seconds.

Important Technical Specifications:

Battery Type: Requires two AA alkaline batteries. Rechargeable batteries are not recommended.
Operating Temperature: The timer should not be used when the air temperature is below 40°F (4.5°C) to prevent damage.
Watering Duration: Up to 360 minutes (6 hours) per cycle.
Rain Delay Duration: Up to 7 days.

Usage Features:

User-Friendly Interface: The timer features a clear digital display and dedicated buttons for "SET CLOCK," "START WATER," "HOW LONG," "HOW OFTEN," and "AUTO," along with cursor and +/- buttons for easy navigation and adjustment. A "MANUAL ON/OFF" button provides quick access to manual watering.
Battery Indicator: A battery indicator on the display provides a visual cue when batteries need to be replaced.
Flexible Programming: The ability to set specific start times, durations, and frequencies offers comprehensive control over watering schedules, catering to diverse plant needs and environmental conditions.
Rain Delay: The rain delay function helps conserve water and prevents overwatering during rainy periods, promoting healthier plants and reducing water waste.
Manual Override: The manual watering feature provides convenience for immediate watering needs without disrupting the programmed schedule.
Automatic Resumption: After a rain delay, the timer automatically resumes its programmed schedule, ensuring consistent watering without manual intervention.

Maintenance Features:

Battery Installation and Replacement: Batteries are installed in a holder at the back of the control unit. It is recommended to replace batteries when the indicator shows low power.
Seasonal Storage: During colder months or when frost is expected, the timer should be removed from the faucet, batteries should be removed, and the unit stored indoors in a dry place to prevent damage from freezing water.
Cleaning: Periodic cleaning of the timer is recommended to prevent debris or sediment buildup from water. This involves turning off the water, removing the timer from the faucet, checking and cleaning the filter washer, and flushing the valve and faucet connection by activating manual mode and allowing water to spray through.
Troubleshooting Open Valve: If the valve is open during installation (indicated by continuous water flow), users are advised to turn off the water, remove and reinsert batteries, and if the problem persists, use the manual feature to open and close the valve three times.
Battery Life Tips: To maximize battery life, users should use fresh alkaline batteries, avoid rechargeable batteries, remove batteries before seasonal storage, and be aware that more frequent watering schedules can drain batteries faster. Batteries are expected to last approximately one season.