Member's Mark SMFPC3F33 - Step 1: Shelf Installation; Inserting Shelf Supports; Placing Adjustable Shelves

Assembly Instructions & User’s Manual
6
Step 1
a) Unpack the units and confirm that you have all hardware and required parts.
b) Open the doors and insert eight Shelf Supports (H1) in the holes at the desired height inside each
compartment. Make sure you place the four Shelf Supports at the same level, so the shelf is not tilted.
c) Tilt and rest the Adjustable Shelves (B) onto the Shelf Supports (H1).
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
B
H1
H1
B
B
B
B
A
H1 x 16