How to fix a Memorex MLT3252 remote that is not working?
If the Memorex TV remote control isn't working, ensure that you're aiming the remote at the sensor located on the bottom right of the TV. Also, try reducing the distance between you and the TV, and minimize any light interference in the room. Remove any obstructions that might be blocking the path of the remote's beam. Finally, check the batteries and replace or reinsert them correctly.
Why is there no sound on my Memorex MLT3252 TV?
If there is no sound on your Memorex TV, ensure the equipment is connected properly. Check the input source by pressing the SOURCE button. Make sure any connected receiver is powered on. Disconnect any earphones plugged into the earphone jack. You can also adjust the volume or press the Mute button to un-mute the TV.
How to troubleshoot no picture on Memorex TV?
If your Memorex TV has no picture, make sure the power cord is securely connected and the power is turned on. Then, select the correct input source by pressing the SOURCE button on your TV or remote.
To Next Page
General
