Memorex MLT3252 User Manual

- 18 -
INSTALLATION
This unit has a CoaxialAudio jack that will provide top audio sound. This is used to connect
to an external digital audio source to hear the sound through that external unit’s speakers.
1
Make sure the power is off on the TV and external unit.
2
Connect a Coaxial Audio cable (not included) from the Coaxial Out jack on the rear of
the TV to the Coaxial In jack on the external digital audio unit.
3
Turn on the TV and digital audio unit.
4
Make sure to set the Digital Audio Out as desired, see page 22.
(Not
Included)
NOTE: SPDIF cables transmit audio signals as pulses of light through a cable made of plastic fibers. Audio signals are
digitally transmitted between devices for optimal sound.
Coaxial Audio Connection

Memorex MLT3252 Specifications

General

Brand	Memorex
Model	MLT3252
Category	TV
Language	English