Memorex MLT3252 User Manual

- 16 -
Connect a computer to this TV as follows:
1
Make sure the power is off on the TV and computer.
2
Connect a VGA cable (not included) from the computer’s VGA Out jack to the VGA
jack on the rear of the TV. Connect an audio cable (not included) from the Audio out
mini jack on the computer to the mini Audio In jack on the rear of the TV.
3
Turn on the TV and computer.
4
Press the SOURCE button and then select PC using the Navigation q/p buttons.
Conrm by pressing the OK button.
RGB OUT (PC)
AUDIO OUT
Computer
(Not
Included)
INSTALLATION
VGA Connection
NOTES:
• For the best results, please set your PC resolution to 1360x768 at 60 Hz.
• Refer to the PC or graphic card’s manual for further instructions on how to set your resolution and refresh rate.
• The VGA port of the TV features a power saving mode which will automatically turn off the TV if there’s no signal provided
for more than five minutes.

Memorex MLT3252 Specifications

General

Brand	Memorex
Model	MLT3252
Category	TV
Language	English