Memorex MLT3252 User Manual

- 13 -
This TV has three HDMI inputs, so connect up to three devices and select the desired one
using the SOURCE button on the remote. Connect as follows:
1
Make sure the power is off on the TV and external unit.
2
Connect an HDMI cable (not included) from the HDMI out jack on the external unit to
one of the HDMI jacks on the rear of the TV.
3
Turn on the TV and external unit.
4
Press the SOURCE button and then select the respective HDMI jack (1, 2 or 3) using
the Navigation q/p buttons. Conrm by pressing the OK button.
DVD, HD Cable Box,
Computer, etc.
(Not Included)
HDMI-3 ARC: With an HDMI-3 ARC setup, the audio connection between your TV and Home Audio Receiver can be
removed. The HDMI cable will transmit the audio signal to and from your TV with an all-digital audio/video connection. Note
that this is only used when going from a device through your Home Receiver and to your TV.
INSTALLATION
HDMI Connection (Preferred Method)

Memorex MLT3252 Specifications

General

Brand	Memorex
Model	MLT3252
Category	TV
Language	English