15
CONNECTIONS (CONTINUED)
NOTES:
• When connecting, refer to the owner’s manual of the external unit, as well as this manual.
• When connecting, make sure the power is off and all units are unplugged before making any connections.
• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.
• When finished connecting, press the Power (On/Standby) button to turn the unit on; then press the SELECT (DVD/VCR) button
on the unit or the VCR button on the remote to select VCR mode. Repeatedly press the NAVIGATION/Channel Up (π)/Down (†)
buttons to select VIDEO 1 for the rear A/V input or select VIDEO 2 for the front A/V input.
CONNECTING AN EXTERNAL UNIT TO THIS PLAYER (USING THE REAR A/V JACKS)
CONNECT AN EXTERNAL UNIT TO THIS PLAYER (USING THE FRONT A/V JACKS)
To Next Page
Loading...