27
VCR SETUP MENU (CONTINUED)
With a prerecorded video cassette tape inserted, enter the
VCR mode and the Setup screen as described on page 22;
the Setup menu will appear. Scroll to Search using the
Navigation (
†) button 1. Press the OK button 2 to select it;
the Search will appear.
1
Press the Navigation (†) button 1 to select Go To Zero
Search, then press the OK button
2; the VCR will then
search until the counter reads “0:00:00”. When it reaches
2
SETTING THE GO TO ZERO SEARCH
With a prerecorded video cassette tape inserted, enter the
VCR mode and the Setup screen as described on page 22;
the Setup menu will appear. Scroll to Search using the
Navigation (
†) button 1. Press the OK button 2 to select it;
the Search will appear.
1
Press the Navigation (†) button 1 to select Counter
Search, then press the OK button
2; the Counter Search
menu will appear.
2
SETTING THE COUNTER SEARCH
Enter the desired counter number to go to using the
Number buttons
1. (Enter the hour for the first digit, then
enter the minute for the second and third digit; i.e., to
search and playback starting from 1 hour and 10 minutes,
enter "1","1","0".) Then press the OK button
2; the VCR will
then search and start playback when the counter position is
reached.
3
NOTE: When searching, press the STOP ■ button to cancel
the searching.
"0:00:00", playback will start automatically.
To Next Page
Loading...
Need help?
General
