Memphis 16-PR2.75 - Signal Input Connections; RCA and High-Level Input Guide

7
SIGNAL INPUT CONNECTIONS
The RCA jack(s) marked 'IN' should be connected to the low level outputs of your source
unit or signal processor. High-level (speaker level) inputs are provided as well.
CHASSIS GROUND BLACK
3 CH (+) GREEN1 CH (+) WHITE
4 CH (+) VIOLET2 CH (+) GRAY
L CH (+) WHITE
R CH (+) GRAY
CHASSIS GROUND BLACK
BRIDGED
R
L
LOW INPUT
HIGH INPUT REMOTE
MIN MAX
GAIN
400Hz40Hz
LPF HPF PROT PWROFF - BOOST - ON
X - OVER
FULL
HPFLPF
400Hz40Hz
FUSE
RL
SPEAKER
PR 2.50
POWER
GND REMOTE
+12V
400Hz40Hz