EN
39
TROUBLESHOOTING
VOICE MESSAGES
The vacuum cleaner communicates with the
help of voice messages. The following voice
messages can be anticipated:
Error message Signicance
Please install the
dustbin.
Put in the dustbin.
Please clean the
suction inlet.
Clean the suction
inlet.
Please turn on the
power switch.
Press the power
switch.
Front bumper switch
fault.
Fault on front
bumper. Check the
sensitivity of the
front bumper and to
make sure the screws
are not loose.
Side brush fault. Fault on side
brushes. Check
whether something
is entangled in the
side brushes.
Wheel overload. The wheels are
overloaded. Check
whether something
is entangled in the
wheels.
Please put the
machine in a safe
place.
Put the vacuum
cleaner in a safe
place.
NOTE:
Rectify the problem according to the voice
message. Restart the vacuum cleaner by
switching it o with the power switch and
then starting it again if the problem cannot
be rectied with the trouble shooting chart.
To Previous Page
Loading...
