MEP SHARK 282 - Page 142

MEP S.p.A.
10--10
132
Use and maintenance manual SHARK 282
SOLUTIONPROBABLE CAUSEPROBLEM
The CCS optional is not working
' Minimum voltage relay .Check that it is correctly
supplied and not burnt out
' Selector switch .Check connections. Replace
if defective
' Lock valve .Check for impurities
preventing correct
functioning. Replace if
defective.
' Regulator .Check that input and output
pipes are free of kinks and
obstructions.
' Spring .Check that the spring is
correctly tensioned
' Cylinder .Check that hydraulic circuit
oil level is sufficient.
' Limiter .Check connections and
functioning
' Head control lever
microswitch
.Check connections and
functioning