1--1
Introduction and
technical
specifications
Foreword
MEP S.p.A.,in response to modern production techniques, has developed the new
SHARK 282.
This work tool has been designed to satisfy the wide range of cutting needs of a
modern workshop with simplicity and reliability, while at the same time
complying with all EEC safety standards.
The SHARK 282 is structurally rigid, silent and safe: it produces a minimum of
waste (1.2 mm) while its great versatility makes it suitable for cutting various
materials such as stainless steel light alloys, aluminium, copper and bronze at
high speed and with high precision.
Its high cutting capacity, combined with the possibility of making inclined cuts
from 60° left to 45° right, make this model the ideal solution for satisfying the
wide strange of cutting needs of machine shops, turneries, structural steel shops
and engineering workshops.
We congratulate our clients on having chosen this product, which will give
effective and faithful service for many years, especially if the instructions
contained in this use and maintenance manual are carefully followed.
This cutting machine has been designed and made specifically for cutting
metallic materials.
Warning
1
To Next Page
Loading...
