Rubber mount properly aligned
7. Install the filter assembly onto the mounting bracket.
8. Connect the fuel line to the engine and prime the engine fuel system.
Inspect the fuel filter area for fuel leaks. Repair as needed.
Propeller Replacement
!
WARNING
Rotating propellers can cause serious injury or death. Never operate the boat
out of the water with a propeller installed. Before installing or removing a
propeller, place the drive unit in neutral and engage the lanyard stop switch
to prevent the engine from starting. Place a block of wood between the
propeller blade and the anti‑ventilation plate.
1. Remove the spark plug leads to prevent the engine from starting.
To Next Page
Loading...
Need help?
General
