WARNING SYSTEM OPERATION 10 HP
The warning horn will emit either a continuous beep or intermittent short beeps
and engine speed will be limited. This will alert the operator and help identify
the following listed situations.
Function Warning Horn
Warning
Lamp
Description RPM Limit
Start up One second System test None
Overheat
Continuous for
six seconds
On
Engine
overheat
2800
Low oil
pressure
Low oil
pressure
Sensor error
Six beeps
no repeats
Six flashes
repeats every
five minutes
Engine sensor
fault
Overspeed * None
Engine speed
too high
Engine
misfire
may be
noticed
Restrictor
Six beeps
no repeats
Six flashes
repeats every
five minutes
Restrictor
missing
2800
* Refer to the Specifications table for RPM limits.
ENGINE OVERHEAT
If the engine overheats, immediately reduce throttle speed to idle. Shift the
outboard into neutral and check for a steady stream of water coming out of the
water pump indicator hole.
To Next Page
Loading...
Need help?
General
