EasyManua.ls Logo

Mercury 1F10201BK User Manual

Mercury 1F10201BK
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation
Maintenance
and
Installation
Manual
© 2019 Mercury Marine
8/9.9 and 9.9 Command Thrust/ProKicker FourStroke
8M0165091 1019 eng

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Mercury 1F10201BK and is the answer not in the manual?

Mercury 1F10201BK Specifications

General IconGeneral
BrandMercury
Model1F10201BK
CategoryOutboard Motor
LanguageEnglish

Summary

General Information

Lanyard Stop Switch

Explains the function and importance of the lanyard stop switch for engine safety.

Safety and Operation Guidelines

Covers protecting people in water, hazards, wave jumping, and emissions safety.

Engine Specifications and Component Identification

Details engine specs and identifies major outboard components for standard and ProKicker models.

Installation

Boat Capacity and Mounting Hardware

Ensuring correct horsepower rating and using validated mounting hardware for safe outboard installation.

Outboard Installation Procedures

Step-by-step instructions for securely mounting the outboard to the boat transom.

Control Cable and Harness Connections

Connecting remote control cables and wiring harnesses for proper engine operation.

Propeller Installation

Safe procedures for installing and removing the outboard propeller.

Transporting

Outboard Handling and Storage

Guidance on carrying, storing, and transporting the outboard when removed from the boat.

Trailering Boat and Outboard

Procedures for safely trailering boats with power tilt or non-power tilt outboards.

Fuel and Oil

Fuel Requirements and Handling

Details on gasoline types, octane, alcohol content, and safe fuel handling.

Engine Oil and Checking Procedure

Recommendations for engine oil and instructions for checking the oil level.

Features and Controls

Tiller and Remote Control Operation

Explanation of tiller handle and remote control features and their operation.

Gear Shifting and Engine Warning Systems

Safe procedures for gear shifting and understanding engine warning systems.

Trim and Tilt Adjustments

How to adjust transom angle, shallow water drive, and tilting the outboard.

Operation

Prestarting Checks and Engine Break-in

Essential prestart checks and the engine break-in procedure for longevity.

Engine Starting Procedures

Detailed steps for starting the engine using tiller handle or remote controls.

Engine Stopping and Emergency Starting

Instructions for safely shutting down the engine and procedures for emergency starts.

Maintenance

Cleaning and Exterior Care

Recommendations for cleaning gauges, remote controls, and outboard surfaces.

Inspection and Maintenance Schedule

Schedule of daily, periodic, and interval maintenance tasks for optimal performance.

Cooling System Flushing and Oil Changes

Procedures for flushing the cooling system and changing engine oil.

Gearcase Lubrication and Propeller Maintenance

Steps for lubricating the gearcase and replacing the propeller.

Storage

Storage Preparation and Protection

Steps to prepare the outboard for storage, including fuel system and internal components.

Positioning and Battery Storage

Correct positioning for storage and guidelines for battery storage.

Troubleshooting

Engine Starting Issues

Diagnoses for starter motor, engine not starting, and erratic engine running.

Performance and Battery Problems

Troubleshooting for reduced performance and battery charge issues.

Owner Service Assistance

Service and Parts Information

Information on obtaining service, replacement parts, and accessories.

Post-Submersion Procedures

Critical steps required immediately after an outboard has been submerged.

Related product manuals