Mercury 125 OptiMax User Manual

6. Attach two cable ties around the grommet tube. Attach the cowl seal.
a - Cable tie
FLUSH HOSE ROUTING
If desired, the flush hose can be routed outside the cowling as follows:
1. Using a needle‑nose pliers, break out the semi‑circular knockouts in the
access cover and lower cover. Smooth the edges of the knockout with
sandpaper or a small knife.
2. Route the flush hose through this opening.
a - Knockout
b - Flush hose
a
23639
a
b
23642
OUTBOARD INSTALLATION
eng 135

Mercury 125 OptiMax Specifications

General

Brand	Mercury
Model	125 OptiMax
Category	Outboard Motor
Language	English