FEATURES AND CONTROLS
49
TILTING OUTBOARD TO FULL UP POSITION
1. Stop the engine.
2. Shift the outboard to forward gear position.
3. Position the tilt lever to the tilt position.
4. Take hold of the top cowl grip and tilt the outboard all the way
up until it locks in place.
LOWERING OUTBOARD DOWN TO RUN POSITION
Position the tilt lever to the release position. Raise outboard slightly
to release it from its locked position and gently lower it.
SHALLOW WATER OPERATION
The shallow water drive position on the outboard allows you to
position the outboard at a higher tilt angle to prevent hitting bottom.
IMPORTANT: Before tilting the outboard into the shallow water
drive position, reduce engine speed to idle and shift engine into
forward gear.
IMPORTANT: While in the shallow water drive position, do not
operate the outboard in reverse. Operate the outboard at slow
speed and keep the cooling water intake submerged.
1. Reduce engine speed to idle.
2. Shift engine into forward gear position.
3. Position the tilt lever to the tilt position.
4. Take hold of the top cowl grip and tilt up the outboard until it
locks in the shallow water running position.
To Next Page
Loading...
Need help?
General
