FEATURES AND CONTROLS
50
5. To release the outboard out of shallow water drive, position
the tilt lever to the release position, slightly lift up the outboard,
and gently lower it down.
SETTING THE OPERATION ANGLE OF THE OUTBOARD
The vertical operating angle of your outboard is adjusted by
changing the position of the tilt pin in the six adjustment holes
provided. Proper adjustment allows the boat to run stable, achieve
optimum performance, and minimize steering effort.
NOTE: Refer to the following lists when adjusting the operating
angle of your outboard.
The tilt pin should be adjusted so the outboard is positioned to run
perpendicular to the water when the boat is running at full speed.
This allows the boat to be driven parallel to the water.
To Next Page
Loading...
Need help?
General
