Mercury 175 Verado User Manual

MAINTENANCE
109
6. Secure the flywheel cover to the rear mounting posts with two
bolts with washers. Tighten bolts to the specified torque.
a
b
c
15247
a - Flywheel cover bolts
b - FSM vent hose
c - Engine ventilation hose
Description Nm lb. in. lb. ft.
Flywheel cover bolt 10 88.5
Fuel System
!
WARNING
Avoid serious injury or death from gasoline fire or explosion.
Carefully follow all fuel system service instructions. Always stop
the engine and do not smoke or allow open flames or sparks in
the area while servicing any part of the fuel system.
IMPORTANT: Use an approved container to collect and store fuel.
Wipe up spilled fuel immediately. Material used to contain spilled
fuel must be disposed of in an approved receptacle.
Before servicing any part of the fuel system:
1. Stop engine and disconnect the battery.
2. Perform fuel system service in a well ventilated area.
3. Inspect any completed service work for sign of fuel leakage.

Mercury 175 Verado Specifications

General

Displacement	2.6L
Horsepower	175 HP
Steering	Electro-hydraulic power steering
Gear Ratio	1.85:1
Cylinders	6
Fuel System	Electronic Fuel Injection (EFI)
Full Throttle RPM Range	5800-6400 RPM
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20" or 25"
Starting	Electric
Recommended Fuel	87 Octane
Engine Type	4-Stroke
Alternator Amp	70 Amp