Mercury 175 Verado User Manual

MAINTENANCE
127
3. Remove fill/drain plug. Place lubricant tube into the fill hole
and add lubricant until it appears at the vent hole.
a
b
22693
a - Vent hole b - Fill hole
IMPORTANT: Replace sealing washers if damaged.
4. Stop adding lubricant. Install the vent plug and sealing washer
before removing the lubricant tube.
5. Remove lubricant tube and reinstall cleaned fill/drain plug and
sealing washer.

Mercury 175 Verado Specifications

General

Displacement	2.6L
Horsepower	175 HP
Steering	Electro-hydraulic power steering
Gear Ratio	1.85:1
Cylinders	6
Fuel System	Electronic Fuel Injection (EFI)
Full Throttle RPM Range	5800-6400 RPM
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20" or 25"
Starting	Electric
Recommended Fuel	87 Octane
Engine Type	4-Stroke
Alternator Amp	70 Amp