OPERATION
33
ob00348
2. Squeeze the fuel line primer bulb several times until it feels firm.
ob00349
3. Set the lanyard stop switch to "RUN" position. Refer to General Information ‑ Lanyard Stop Switch.
ob00350
4. Set the throttle grip to start position.
ob01175
.
ob00558
IMPORTANT: Electric starting outboards must not be run or started, either manually or electrically, without
having the outboard battery cables connected to a battery. Damage to the charging system may result.
5. Side handle gear shift models ‑ Set the gear shift to neutral position.
To Next Page
Loading...
