OPERATION
34
R
F
N
3022
6. Turn primer/idle speed knob full clockwise to increase engine idle speed.
ob01396
7. Cold Engine ‑ Pull out and push in the primer/idle speed knob one to three times to prime the engine.
Leave the knob in the pulled out position when starting.
ob01384
8. Manual Starting Models ‑ Pull the starter rope slowly until you feel the starter engage, then pull rapidly to
crank the engine. Allow rope to return slowly. Repeat until engine starts.
ob01176
9. Electric Starting Models ‑ Push starter button and crank the engine. Release button when engine starts.
Do not operate starter motor continuously for longer than ten seconds at a time. If engine fails to start,
wait 30 seconds and try again.
ob00545
10. Push in the primer/idle speed knob after engine starts. If engine begins to stall, reprime until engine is
running smoothly.
To Next Page
Loading...
Need help?
General
