OPERATION
106 eng
Gear Shifting
DTS PANEL MOUNT REMOTE CONTROL
IMPORTANT: Never shift outboard into gear unless engine
speed is at idle. Do not shift outboard into forward or reverse
when the engine is not running.
• The outboard has three gear shift positions to provide
operation: Forward (F), Neutral (N), and Reverse (R).
3427
F
N
R
• When shifting, always stop at neutral position and allow the
engine speed to return to idle.
• Panel mount remote control requires the operator to always
press shift lock while moving the control handle out of the
neutral position.
3428
• Advance the control lever to further increase speed.
To Next Page
Loading...
Need help?
General