MAINTENANCE
126 eng
4. Before installing spark plugs, clean off any dirt on the spark
plug seats. Install plugs finger‑tight, and then tighten 1/4 turn
or torque to specifications.
Description Nm lb‑in. lb‑ft
Spark plug 27 20
Compressor Air Intake Filter
The filter should be changed every 100 hours of operation, or
once a season.
IMPORTANT: Never run the engine without the compressor air
intake filter.
REMOVAL
1. Open the clamp and lift out the filter housing. Rotate the
filter housing 1/4 turn clockwise to the unlock position and
remove the air filter.
To Next Page
Loading...
