FEATURES AND CONTROLS
eng 71
4. Troll button ‑ Pressing the "TROLL" button activates troll
control. The troll control feature allows the boat operator to
set the engine speed for slow speed cruising or
maneuvering. To activate, move the control handles into
forward detent and press the button. Use the ‑ or + buttons
to decrease or increase speed, up to a maximum of 1000
RPM. If troll control is set at a desired speed and then shut
off, the system remembers the set speed and will return to
that speed when reengaged. To turn off the troll control
press the "TROLL" button, move the throttle to a different
speed, or shift the engine into neutral.
5. Transfer button ‑ Pressing the "TRANSFER" button allows
engine operation to be transferred from a different helm.
Refer to Helm Transfer.
6. Dock button ‑ Pressing the "DOCK" button initiates docking
mode. Docking mode reduces throttle capacity to
approximately 50% of normal throttle. To turn off docking
mode, shift the engine into neutral and press the "DOCK"
button.
7. Throttle only button ‑ Allows the boat operator to increase
engine RPM for warm‑up, without shifting the engine into
gear. To engage throttle only, move the control handle into
the neutral position. Press the throttle only button and move
the control handle ahead to the forward detent. The horn will
sound once and the neutral light will start flashing. The horn
will sound twice when throttle only is engaged. Advance
throttle to increase engine RPM. To disengage, return
control handle to neutral position and press the throttle only
button. Engine RPM is limited to prevent engine damage.
8. 1 lever button ‑ Pressing the "1 LEVER" button initiates
single lever mode. Single lever mode enables the throttle
and shift functions of both engines to be controlled by the
port control handle. To turn off single lever mode, shift the
engine into neutral and press the "1 LEVER" button.
To Next Page
Loading...
Need help?
General