Mercury 200 OptiMax DTS User Manual

FEATURES AND CONTROLS
eng 79
If a failure should occur while underway which causes the
starboard outer engines into forced neutral/idle condition, the
inner starboard engine will also be forced to neutral/idle.
Operation to the inner engine can be restored by moving the
starboard control handle back into neutral and then reengaging.
If a failure should occur while underway which causes the port
outer engines into forced neutral/idle condition, the inner port
engine will also be forced to neutral/idle. Operation to the inner
engine can be restored by moving the port control handle back
into neutral and then reengaging.
TRIM SWITCH AND KEY PAD FEATURES
1. Trim switch (if equipped) ‑ Operates the trim for all engines.
An accessory trim switch panel is required for trimming
engines individually.
B
O
T
H
N
E
U
T
R
A
L
S
E
L
E
C
T
A
C
T
I
V
E
O
N
L
Y
T
H
R
O
T
T
L
E
S
T
A
T
I
O
N
S
E
L
E
C
T
S
Y
N
C
13853

Mercury 200 OptiMax DTS Specifications

General

Brand	Mercury
Model	200 OptiMax DTS
Category	Boat
Language	English