EasyManuals Logo

Mercury 25 4-Stroke User Manual

Mercury 25 4-Stroke
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
TRANSPORTING
22
IMPORTANT: The tilt lock lever should be used to lock the outboard down when trailering. This will prevent the
outboard from bouncing and causing possible damage to the outboard.
Shift the outboard to forward gear. This prevents the propeller from spinning freely.
Transporting Portable Fuel Tanks
!
WARNING
Avoid serious injury or death from a gasoline fire or explosion. Follow portable fuel tank transporting instructions.
Transport the fuel tank in a well ventilated area away from open flame or sparks.
MANUAL VENTING TYPE FUEL TANK
1. Close fuel tank air vent when transporting tank. This will prevent escape of fuel or vapors from tank.
ob00325
AUTO-VENTING TYPE FUEL TANK
1. Disconnect the remote fuel line from tank. This will close the air vent and prevent escape of fuel or vapors
from tank.
2. Install tether cap over the fuel line connector stem. This will protect the connector stem from being accidently
pushed-in, thus, allowing fuel or vapor to escape.
F
ob00326
a
b
a - Connector stem b - Tether cap

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 25 4-Stroke and is the answer not in the manual?

Mercury 25 4-Stroke Specifications

General IconGeneral
Engine Type4-Stroke
Horsepower25 hp
Cylinders2
Fuel Induction SystemElectronic Fuel Injection (EFI)
Full Throttle RPM Range5000-6000 RPM
Starting SystemElectric
SteeringRemote or Tiller
Shaft Length15 in / 20 in
Dry Weight157 lbs
Fuel Tank CapacityExternal
Oil Capacity1.5 L (with filter)

Related product manuals