Mercury 25 4-Stroke User Manual

MAINTENANCE
58
2. Lubricate the following with Quicksilver or Mercury Precision Lubricants 2-4-C with Teflon or Special Lubricant
101.
• Swivel Bracket - Lubricate through fitting.
ob00635
• Tilt Tube - Lubricate through fittings.
• Co-Pilot Shaft (Tiller Handle Models) - Lubricate through fitting. Move the steering friction lever back
and forth while lubricating.
ob00636
a
b
a
a - Tilt tube b - Co-Pilot shaft
• Lubricate threads on transom clamp screws (if equipped).
ob00637
• Steering Cable Grease Fitting (If equipped) - Rotate steering wheel to fully retract the steering cable
end into the outboard tilt tube. Lubricate through fitting.

Mercury 25 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	25 hp
Cylinders	2
Fuel Induction System	Electronic Fuel Injection (EFI)
Full Throttle RPM Range	5000-6000 RPM
Starting System	Electric
Steering	Remote or Tiller
Shaft Length	15 in / 20 in
Dry Weight	157 lbs
Fuel Tank Capacity	External
Oil Capacity	1.5 L (with filter)