Mercury 25 Jet 4-Stroke - Page 114

ENGINE INSTALLATION
108
3. Loosen the harness retainer. Route the remote harness into
the cowl as shown and below the harness retainer.
a
b
24858
a - Harness retainer b - Remote harness
4. Connect the remote harness to the engine harness connector.
a
24859
a - Harness connector
5. Fasten the remote harness to the cowl with the harness
retainer. Tighten the bolt to the specified torque.
Description Nm lb. in. lb. ft.
Harness retainer bolt 6 53