MAINTENANCE
76
NOTE: If the outboard is used in salt water, apply Quicksilver or
Mercury Precision Anti‑Corrosion Grease around the entire
mounting flange on the water intake housing and also to the
threads on the six mounting bolts.
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Water intake housing
mounting flange and
mounting bolts
92-802867A1
6. Reinstall the water intake housing with six bolts. Check
clearance around the impeller to ensure the water intake
housing is centered and not rubbing against the liner. Torque
mounting bolts to specifications.
ob01411
Description Nm lb. in. lb. ft.
Water intake housing mounting bolts 13 120
Shift Link Rod Adjustment
!
WARNING
The shift link rod must be adjusted to lock the reverse gate
against unexpected engagement (caused by water pressure
hitting the gate) while operating the boat in forward. Activation of
the reverse gate will cause sudden unexpected stopping of the
boat. Sudden stopping may cause occupants to be thrown within
the boat or even out of the boat. This action may result in serious
injury or death.
To Next Page
Loading...
