GENERAL INFORMATION
16
!
WARNING
Disengagement of a steering link rod can result in the boat taking
a full, sudden, sharp turn. This potentially violent action can
cause occupants to be thrown overboard exposing them to
serious injury or death.
a - Self‑locking nuts
Lanyard Stop Switch
The purpose of a lanyard stop switch is to turn off the engine when
the operator moves far enough away from the operator's position
(as in accidental ejection from the operator's position) to activate
the switch. Tiller handle outboards and some remote control units
are equipped with a lanyard stop switch. A lanyard stop switch can
be installed as an accessory ‑ generally on the dashboard or side
adjacent to the operator's position.
To Next Page
Loading...
