Mercury 25 Jet 4-Stroke User Manual

MAINTENANCE
65
Outboard Care
To keep your outboard in the best operating condition, it is
important that your outboard receive the periodic inspections and
maintenance listed in the Inspection and Maintenance
Schedule. We urge you to keep it maintained properly to ensure
the safety of you and your passengers, and retain its dependability.
!
WARNING
Neglected inspection and maintenance service of your outboard
or attempting to perform maintenance or repair on your outboard
if you are not familiar with the correct service and safety
procedures could cause personal injury, death, or product failure.
Record maintenance performed in the Maintenance Log at the
back of this book. Save all maintenance work orders and receipts.
SELECTING REPLACEMENT PARTS FOR YOUR
OUTBOARD
We recommend using original Mercury Precision or Quicksilver
replacement parts and Genuine Lubricants.
!
WARNING
Using a replacement part that is inferior to the original part could
result in personal injury, death, or product failure.

Mercury 25 Jet 4-Stroke Specifications

General

Horsepower	25 HP
Engine Type	4-Stroke
Full Throttle RPM Range	5000-6000 RPM
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	15" / 20"
Gear Ratio	2.08:1
Recommended Fuel	87 octane / up to 10% ethanol
Starting	Electric
Weight	71 kg / 157 lbs (Lightest Model Available)
Steering	Tiller
WOT RPM	5000-6000 RPM